KX-610 Oil-filled Cast Nylon
An oil-filled cast nylon with built-in lubrication for dry-running parts. Ideal where external grease isn’t possible, such as bushings, slides and wear pads that need to run clean and quiet for years.
Max service temp
110 °C
Density
1.14 g/cm³
Friction coeff.
0.12 μ
Available as
Rod Ø 20–500 mm · Plate 8–150 mm · Tube · Machined to drawing
Technical data
Specifications
Typical values at 23 °C, 50% RH. Test methods to ISO standards; full data is in the datasheet.
Mechanical
Tensile strength
80 MPa
Elongation at break
25 %
Flexural modulus
3,100 MPa
Impact strength
4 kJ/m²
Hardness
82 Shore D
Friction coefficient
0.12 μ
Thermal & physical
Max service temp
110 °C
Short-term max temp
160 °C
Melting point
220 °C
Thermal expansion
8 × 10⁻⁵ /K
Density
1.14 g/cm³
Water absorption
2.2 %
Applications
